Home ┬╗ 132Z panel sun louver
Categories
132Z panel sun louver
  • 132Z panel sun louver
  • 132Z panel sun louver
  • 132Z panel sun louver

132Z panel sun louver

Prolouver 70Z,132Z sun louver is made up of roll formed aluminum panel with rilled edges, in Z shaped, consisting of two vertical face and one beveled face. Vertical height is 70mm or 132mm. The panels are fixed to purpose-made extruded aluminum brackets without the use of any fasteners, and are designed to permit and contraction. It has excellent performance in sun louver and waterproof.
Detailed description
 

Prolouver 70Z,132Z sun louver is made up of roll formed aluminum panel with rilled edges, in Z shaped, consisting of two vertical face and one beveled face. Vertical height is 70mm or 132mm. The panels are fixed to purpose-made extruded aluminum brackets without the use of any fasteners, and are designed to permit and contraction. It has excellent performance in sun louver and waterproof.  

 

 

Prolouver 132Z sun louver description:

 

PROLOUVER-132Z LOUVER

Panel Size

132mm effevtive width

[ recommended panel spacing at 150mm c/c]

Thickness

0.6mm,0.7mm thick

Panel End

Panel end holding must not exceed 300mm from end mullion

 

 

 

 

 

 

 

 

TYPE OF BRACKET

Bracket Size

25mm width vertical fixed aluminium bracket

[maximum length fixing at 0.3 metre centre to centre to be supported by main structural frame]

Thickness

2.0mm thick aluminium

[for height above 10 metre, maximum carrier spacing must not exceed 900mm c/c]

   

PROLOUVER-132Z LOUVER

Panel Size

70mm effevtive width

[ recommended panel spacing at 150mm c/c]

Thickness

0.6mm,0.7mm thick

Panel End

Panel end holding must not exceed 300mm from end mullion

 

TYPE OF BRACKET

Bracket Size

25mm width vertical fixed aluminium bracket

[maximum length fixing at 0.3 metre centre to centre to be supported by main structural frame]

Thickness

2.0mm thick aluminium

[for height above 10 metre, maximum carrier spacing must not exceed 900mm c/c]